Grill model: GJK3-N

16

KK-BS Burner support Bracket (Set of two). MORE...

16A

KK-HBC Hybrid stainless steel burner support. MORE...

24

KK-WL3 Locking castors, bottom. Sold individually, four (4) required. MORE...

25

KK-DEF Ignitor shield. MORE...

26

KK-IP Instruction panel. MORE...

27

KK-SSBZ Stainless steel bezel. Sold individually, four (4) required for GJK. MORE...

28

KK-K10 Valve Knob For GJK, WRG, TRG grills.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16" / 8mm
• Knob shaft: flat MORE...

29

KK-EIB Electronic Ignitor module.

• Two outlets
• Uses AAA battery, not included
• Requires 3/4" mounting hole MORE...

29A

KK-EIB4 Hybrid Electronic Ignitor module.

• Four outlets
• Uses AAA battery, not included
• Requires 3/4" mounting hole MORE...

30

GG-ERIW 12" igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

Note: Part GG-ERIW is the factory authorized replacement for the following parts, which are no longer available:

• MHP:KK-IW

MORE...

31

KK-IB Igniter collector box for GJK. MORE...

32

HH-DSB Genuine OEM stainless steel H Burner for JNR and GJK Burner only. MORE...

32C

KK-IBC Infrared burner clip used in models GHJK. MORE...

34

HH-GRATE-SS Premium grade stainless steel rock grate with 1/4" rods'. FIts AMCJ, JNR, GJK & GHJK model grills. MORE...

39

KK-GSH Stainless Steel Handle for GJK Grill MORE...

40

KK-MANN Natural Manifold and Valve. MORE...

40

KK-MANP Propane Manifold and Valve. MORE...

51

GG-SS-GRID Heavy-duty stainless steel cooking grid for GJK, WNK, and TJK series grills.

• High grade stainless
• 5/16" solid stainless rods
• Sold individually. MORE...

52

KK-TS Stainless steel warming rack for GJK MORE...

53

ASCPL-2 12ft vinyl 3/8" ID natural gas Sturgis hose (inside diameter 3/8" and outside diameter about 1/2") with solid brass fittings. Use with brass coupler part# ASCPL-3 (not included). See part# ASCPL-1 for hose and coupler set.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

54

ASCPL-3 Brass 3/8" Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

99

RK36 Optional rotisserie kit. Includes:

• R06 stainless steel motor
• SR-8 36" X 5/16" spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-3B Inverted motor mounting bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load MORE...

?

ASCPL-1 Five piece 3/8" natural gas quick disconnect set includes:

• Part ASCPL-2 12ft vinyl 3/8" ID Sturgis hose (3/8" inside diameter outside diameter about 1/2") with solid brass fittings
• Part ASCPL-3 Sturgis brand 3/8" quick connect brass coupler
• Hansen & Sturgis dust cover
• plastic dust plug
• Plastic 3/8 MPT Snap Tite
• Suitable up to approximately 60,000 BTU. MORE...

?

ASCPL-3 Brass 3/8" Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

GG-BQ3 Porcelain Briquettes for WNK model grills. Exclusive self-cleaning Flavor Master long lasting porcelain briquettes provide food with a cleaner, fresher and better barbecue flavor. Unlike metal flavor plates/bars, the Flavor Master briquettes will not rust. Contains 67 briquettes and covers approximately 385 sq. inches. Made in USA. MORE...

?

GG-SSGRIDAMC Channel Design Stainless Steel Cooking Grid for MHP Grill Models. Sold individually, requires two pieces. MORE...