Grill model: JNR4-P

2

GG-TG4 Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2" diameter.
• Single prob
• Requires 3/8" mounting hole MORE...

3

HH-SH Stainless Stay Cool Handle for JNR models. MORE...

4

GG-SHC Handle End Cap for right or left side of stainless steel handle, includes screw & gasket for JNR, TJK, TRG, WNK, WRG. Cannot be used with the old end cap GG-SHCL (left side) or old end cap GG-SHCR (right side) which are being discontinued.

Also included in handle kit GG-HANKIT and HH-HANKIT.

Note: Part GG-SHC is the factory authorized replacement for the following parts, which are no longer available:

• MHP:GG-SHCR
• MHP:HH-SHC

MORE...

4

HH-HANKIT Complete stainless steel stay cool handle kit for JNR models. Kit includes:

• One (1) HH-SH Stainless Steel Stay Cool handle 13 7/8" long
• Two GG-SHC handle end caps for right and left sides
• Hardware MORE...

8

HH-SSTS Stainless Steel Top Shelf for JNR. Cooking surface dimension is 21 7/8" by 5 3/4". Maximum overal length, including support rods, is 22 3/8". MORE...

10

HH-DSB13 Exclusive patented H type stainless steel dual burner and venturi assembly. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK MORE...

10

HH-DSB Genuine OEM stainless steel H Burner for JNR and GJK Burner only. MORE...

12

GG-IB Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK MORE...

14

GG-JN 1/8-27 Jam nut. MORE...

15

HH-GRATE-SS Premium grade stainless steel rock grate with 1/4" rods'. FIts AMCJ, JNR, GJK & GHJK model grills. MORE...

16

HH-GRID-S SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2). MORE...

16

HH-SSGRID2 Stainless steel cooking grid for JNR. JNR4 Series standard cooking grid is made of 1/4" stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2" x 9 15/16".
NOTE: SOLD INDIVIDUALLY. TWO REQUIRED. SHIPS FROM THE MANUFACTURER IN A BOX OF TWO. MORE...

17

HH-BQ3J Porcelain Briquettes for JNR and GJK Model Grills. Exclusive self-cleaning Flavor Master long lasting porcelain briquettes provide food with a cleaner, fresher and better barbecue flavor. Unlike metal flavor plates/bars, the Flavor Master briquettes will not rust. Contains 53 briquettes and covers approximately 304 sq. inches. Made in USA. MORE...

18

GG-GCH Grease Cup Holder For Grill Replacement Parts for JNR, WNK, TJK MORE...

20

HH-VLV32 Natural Valve for JNR MORE...

21

HH-VLV28 Propane Valve for JNR MORE...

23

GG-ERIW 12" igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

Note: Part GG-ERIW is the factory authorized replacement for the following parts, which are no longer available:

• MHP:KK-IW

MORE...

24

GG-K10 Main control knob for JNR, WNK, TJK.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8"
• Socket diameter: 5/16"
• Knob shaft: 1/4" MORE...

25

GG-EIB Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK. MORE...

31

HH-DDSKG Stainless steel drop down side shelf kit can be used on right or left sides; includes hardware. The BBQ tools' hangers are on the end of the side shelf. (Previously, there were right and left side shelves with the BBQ tools' hangers on the front of the shelves.)

Note: Part HH-DDSKG is the factory authorized replacement for the following parts, which are no longer available:

• MHP:HH-DDSKRHG

MORE...

33

SW1 1/4 x 20 lock washer. MORE...

66

HR-4B Type 1 LP Regulator with 22" Pressure Hose and 3/8" Female Flare Fitting.FITS: Up to 60,000 BTUs MORE...

70

GG-LPP Lid Pivot Pin For BBQ'er Choice Replacement Parts for JNR, WNK, TJK. See Hitch Cotter Pin GG-LPP-1 used on GG-LPP. MORE...

71

GG-LPP-1 Hitch Cotter Pin. Used on part GG-LPP (Lid Pivot Pin) and burner parts GG-DSB, HH-DSB. MORE...

81

HH-DEF JNR Deflector Shield For Control Panel MORE...

83

GG-CPB Control Panel Bracket repair part for JNR, WNK, TJK MORE...

99

HH-CVPREM Grill cover, mid-length design. Sized to fit JNR grills with one (1) side shelf. Premium quality polyester lined vinyl fabric remains flexible, resists cracking.

• EZ off, EZ on velcro tabs
• 40" left to right
• 20" front to back
• 24" top to bottom MORE...

?

GG-BQ3 Porcelain Briquettes for WNK model grills. Exclusive self-cleaning Flavor Master long lasting porcelain briquettes provide food with a cleaner, fresher and better barbecue flavor. Unlike metal flavor plates/bars, the Flavor Master briquettes will not rust. Contains 67 briquettes and covers approximately 385 sq. inches. Made in USA. MORE...

?

GG-GC-SET Grease Cup & Holder for JNR, WNK, TJK MORE...

?

GG-GC Stainless steel grease cup for JNR, WNK, and TJK. MORE...

?

GG-TG3 Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe. MORE...

?

GG-WB10 Narrow wooden brush with brass bristles for MHP SearMagic grids. Reinforced Bristle Retention - each brass bristle is folded, densely packed, and stapled into the wood handle to support secure placement under normal use. MORE...

?

GG-WB5 Forked wooden grid cleaning brush for MHP SearMagic grids. MORE...