Grill model: WHRG4

16

GG-GRID-S SearMagic Cooking Grid for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables. MORE...

31

HH-DDSKG Stainless steel drop down side shelf kit can be used on right or left sides; includes hardware. The BBQ tools' hangers are on the end of the side shelf. (Previously, there were right and left side shelves with the BBQ tools' hangers on the front of the shelves.)

Note: Part HH-DDSKG is the factory authorized replacement for the following parts, which are no longer available:

• MHP:HH-DDSKRHG

MORE...

99

GG-CVPREM Premium quality black mid-length vinyl grill cover.

• Constructed of durable vinyl
• Velcro closure allows for easy on-off
• Designed to cover grills with shelves in the up position

MORE...

?

GG-TG3 Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe. MORE...

?

GG-WB10 Narrow wooden brush with brass bristles for MHP SearMagic grids. Reinforced Bristle Retention - each brass bristle is folded, densely packed, and stapled into the wood handle to support secure placement under normal use. MORE...

?

GG-WB5 Forked wooden grid cleaning brush for MHP SearMagic grids. MORE...

?

GG-GRATE-HSS Briquette grate for WHRG and THRG; has a one inch elevation by four corner support pegs/feet.

Note: Part GG-GRATE-HSS is the factory authorized replacement for the following parts, which are no longer available:

• MHP:GG-GRATE-H

MORE...

?

GG-CPLBLHE WRG/TRG/WHRG/THRG Control Panel Label MORE...

?

GG-DDSKG Left & Right Drop Down Stainless Steel Side Shelf Kit Complete. Double Stainless Steel Drop Down Shelf Kit Includes (2) Sets of Drop Down Brackets, (2) Side Shelves & Hardware. Fits: WNK, TJK, WHRG, WRG, THRG, TRG, W3G, T3G Model Grills.

NOTE: Per MHP, for some models, the end user would need to drill a second hole for each bracket in the bottom casting. MORE...

?

GG-EIB3 3 Prong Electronic Ignitor for Infrared Grills MORE...

?

GG-HANKIT Complete stainless steel stay cool handle kit for WNK models.

Kit includes
• one (1) GG-SH SS Stay Cool handle 17 7/8" long
• Two GG-SHC handle end caps
• Hardware MORE...

?

GG-HCSSB Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK. MORE...

?

GG-HIB Hybrid burner collector box. MORE...

?

GG-IBC Infrared burner clip (1) and cotter pins (2) used in models THRG, TRG, WHRG and WRG. MORE...

?

GG-IIP Infrared/Hybrid Ignitor Probe MORE...

?

GG-IPS Infrared Hybrid Probe Shield MORE...

?

GG-IRB Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4" by 6 1/2". (For infrared burner clip, refer to your model number. There are two for different models: GG-IBC and KK-IBC.) MORE...

?

GG-MAN-PH LP Manifold & Valve for WHRG, & THRG Models MORE...

?

GG-SHC-SET Handle end caps, set of two # GG-SHC, for right and left side of stainless steel handle, with screws & gaskets for JNR, TJK, TRG, WNK, WRG.

Also included in handle kit GG-HANKIT.

Note: Part GG-SHC-SET is the factory authorized replacement for the following parts, which are no longer available:

• MHP:GG-SHCL

MORE...

?

GG-SHC Handle End Cap for right or left side of stainless steel handle, includes screw & gasket for JNR, TJK, TRG, WNK, WRG. Cannot be used with the old end cap GG-SHCL (left side) or old end cap GG-SHCR (right side) which are being discontinued.

Also included in handle kit GG-HANKIT and HH-HANKIT.

Note: Part GG-SHC is the factory authorized replacement for the following parts, which are no longer available:

• MHP:GG-SHCR
• MHP:HH-SHC

MORE...

?

GG-SH Stay Cool Stainless Handle Replacement Parts for WNK/TJK/WRG MORE...

?

GG-TG4 Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2" diameter.
• Single prob
• Requires 3/8" mounting hole MORE...

?

GG-TS-S SearMagic Warming Rack for JNR, WNK, TJK, WRG, TRG. High Performance, Rust-Free Anodized Aluminum warming rack. This unique warming rack heats up faster and cooks all foods at a uniform temperature. MORE...

?

KK-K10 Valve Knob For GJK, WRG, TRG grills.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16" / 8mm
• Knob shaft: flat MORE...